Start by taking the visor off of your helmet using a quarter on the outside and a half-inch wrench on the inside. The original black plastic bolt is a quarter-turn locking mechanism, so pay attention to how it works. It locks in one position and releases in another. You'll have to pop it off the first time.

Next, take the old lens off. DO NOT REMOVE THE TAPE OR THE PROTECTIVE COVERINGS ON YOUR NEW LENS EXCEPT NEAR THE HOLES IN THE FRONT AND BACK.

Now,install the new lens and visor on the helmet (the lens should move independently), but do not tighten the bolts.

Next, remove the tape and the protective film on the front side and adhere it to the visor from the center out (this allows equal stress across the lens).

Finally, tighten the bolts and remove the protective film from the back of the new lens. That's it. You're done.

Start by taking the visor off of your helmet using a quarter on the outside and a half-inch wrench on the inside. The original black plastic bolt is a quarter-turn locking mechanism, so pay attention to how it works. It locks in one position and releases in another. You'll have to pop it off the first time.

Next, take the old lens off. DO NOT REMOVE THE TAPE OR THE PROTECTIVE COVERINGS ON YOUR NEW LENS EXCEPT NEAR THE HOLES IN THE FRONT AND BACK.

Now,install the new lens and visor on the helmet (the lens should move independently), but do not tighten the bolts.

Next, remove the tape and the protective film on the front side and adhere it to the visor from the center out (this allows equal stress across the lens).

Finally, tighten the bolts and remove the protective film from the back of the new lens. That's it. You're done.

Please note that in order to use this converter (or any other USB to Serial converter) you need to use Jump-Track version 2.00.D or version 3.00.

Performance Designs Slinks for reserves.

Package includes a set of 4 Slinks and installation instructions. PD Reserve Slinks can also be used in place of metal links to attach the pilot chute to the main deployment bag or to the top of a canopy.

Search terms: Slinks, Soft Links

Recommended for use on Tandems.

Silibands are silicone elastic bands designed to stow parachute lines.  Made of silicone modified for this specific use, Silibands are available in different sizes to obtain the best result according to the type of suspension line in use.

DETAILS

• Made of silicone, highly consistent in extremely different environments, from very hot to very cold, and from very humid to very dry
• Don’t get sticky or dirty, and have a comfortable elasticity. Moreover, the material doesn’t have memory, and even when elongated for some time, it will return promptly to its original size
• Specifically shaped to stow suspension lines, with a round section, holding the stows in place even at lower tensions
• Manufactured in bright orange, for easier check of stows
• Each size is clearly marked to be easily recognized
• Operating temperature: -40 .. +460 °F (-40 .. 240 °C)
• Storage: 20 years

Notes:
1) It is suggested that you use two different sizes on the same bag, the larger size where the line stows are thicker (before the cascades), and the smaller size for the last stows.
2) We have listed the manufacturer's suggested sizes. Sizes to be used depend on the effective type of suspension line, the brand and size of the bag, and your packing skills and habits.

WARNING!  Use of incorrect size or line stows that are too long may create bag-lock malfunctions or out of sequence openings. Always refer to the container manufacturer's manual for packing instructions.

Altimeter not included.

Let’s face it. Electronic devices and water don’t play well together. L&B wants your Optima, Solo, and/or Viso to last a lifetime, so they came up with the Protektor.

The Protektor helps to keep your Optima, Solo, or Viso dry and functional even if you don’t make it to the other side of the pond.

Specifically designed for the Optima, Solo, and Viso, the Protektor keeps your device nice and dry. The two-piece clamshell design keeps water out of your Optima, Solo, or Viso and still allows full functionality of the unit and visibility of the screen interface.

Altimeter Sold Separately.

Camera flyers and competitors alike will find the Optima LED a very versatile tool to help them keep track of their altitude, even during the most intense skydives. Add an Optima LED to your altitude awareness arsenal and have the extra edge you need in the sky.

Note: The Optima LED works with the original Optima, which has a port for the Optima LED. The Optima LED does not work with the standard Optima II, which has no port.

Tossed blue skulls and cross bones on black doo rag.

Set of two blue lenses for Airfoil 7600, 7610, or 7617 goggles.