Performance Designs Slinks for reserves.

Package includes a set of 4 Slinks and installation instructions. PD Reserve Slinks can also be used in place of metal links to attach the pilot chute to the main deployment bag or to the top of a canopy.

Search terms: Slinks, Soft Links

Start by taking the visor off of your helmet using a quarter on the outside and a half-inch wrench on the inside. The original black plastic bolt is a quarter-turn locking mechanism, so pay attention to how it works. It locks in one position and releases in another. You'll have to pop it off the first time.

Next, take the old lens off. DO NOT REMOVE THE TAPE OR THE PROTECTIVE COVERINGS ON YOUR NEW LENS EXCEPT NEAR THE HOLES IN THE FRONT AND BACK.

Now,install the new lens and visor on the helmet (the lens should move independently), but do not tighten the bolts.

Next, remove the tape and the protective film on the front side and adhere it to the visor from the center out (this allows equal stress across the lens).

Finally, tighten the bolts and remove the protective film from the back of the new lens. That's it. You're done.

Note: These gloves feature white Spandex backs with black leather palms.

Size Chart

DIGITAL ALTIMETER

* Choice of altitude display while climbing to altitude
* Sound can be disabled
* Altimeter view can be rotated 180° for freefall
* Altimeter view resolution can be adjusted

The high contrast graphic display has been specifically developed to be clearly readable in all lighting conditions.

AUDIBLE ALTIMETER

* Powerful and easy to recognize audible signals
* 3 freefall warning altitudes available
* Optional countdown warning signal
* 3 canopy descent warning signals available
* Freefall warnings and countdown timer can be preset in 9 user profiles
* Named profiles can be saved with jump information
* Profiles can be reviewed while climbing to altitude
* Freefall simulation is available to check settings.

The powerful altitude signals, now available under an open canopy too, can be set at different volumes and are easy to recognize. It is also possible to set just the alarms you need, so you can avoid having too many warnings that can be confusing in some conditions.

JUMP LOGGER

* Information about the last 200 jumps is automatically recorded
* Each jump logs: type and number of jump, date and time, exit and deployment altitudes, freefall time, maximum and average freefall speeds
* The logbook can be uploaded to a PC using the optional Skytronic-to-USB interface
* The logbook can be reset at any time
* Initial jump number can be set while resetting logbook

STATISTICS

* Maintains jump history: highest exit altitude, lowest deployment altitude, highest freefall speed
* Counts jumps made
* Totals freefall time
* Statistics and initial freefall time can be reset

SPECIFICATIONS

* Microprocessor-based Skydiving Computer
* Wide size graphic LCD
* Intuitive graphical user interface
* Ergonomic Navigation Switch
* Real time altitude indicator
* Altitude range: 0-21,500 ft
* Water resistant
* 3 separate freefall altitude warnings available: 1,000 to 9,000 feet (first altitude warning always goes off at preset altitude, the others only at vertical speed exceeding 100 ft/s)
* 3 separate low speed altitude warnings available: 100 to 6,000 feet
* Powerful audible signals that are distinct and easy to recognize
* User profiles: up to 9 customized preset values of warnings can be stored and recalled
* Self-calibration (manual reset allowed), self-test, no power-on, low power consumption
* Easily programmable on the ground or while climbing to altitude
* Jump log (up to 200 jumps): date, time, exit altitude, deployment altitude, freefall time, maximum and average freefall speed
* Statistics: number of jumps, total freefall time, highest exit altitude, lowest deployment altitude, highest freefall speed
* Low battery indicator
* PC link to upload information to a computer (external interface optional)
* Batteries: 1 x CR2450
* Size: 2.5" x 1.7" x 0.6"

Start by taking the visor off of your helmet using a quarter on the outside and a half-inch wrench on the inside. The original black plastic bolt is a quarter-turn locking mechanism, so pay attention to how it works. It locks in one position and releases in another. You'll have to pop it off the first time.

Next, take the old lens off. DO NOT REMOVE THE TAPE OR THE PROTECTIVE COVERINGS ON YOUR NEW LENS EXCEPT NEAR THE HOLES IN THE FRONT AND BACK.

Now,install the new lens and visor on the helmet (the lens should move independently), but do not tighten the bolts.

Next, remove the tape and the protective film on the front side and adhere it to the visor from the center out (this allows equal stress across the lens).

Finally, tighten the bolts and remove the protective film from the back of the new lens. That's it. You're done.

Features blue frames with Revo mirrored lenses made of a multi-layered titanium that provides a brilliant rainbow color. These are also scratch resistant. Comfortable adjustable elastic headstrap. Helmet compatible (most helmets).

LENS:

Limited quantities available.

Search terms: Jump-Track, Jumptrack

Soft micro-fiber storage bag included.

Removable, durable Facial Cavity™ Seal locks onto lightweight ANSI certified frames that literally seal your eyes from anything the road or the weather throws at you.

Removable, durable Facial Cavity™ Seal locks onto lightweight ANSI certified frames that literally seal your eyes from anything the road or the weather throws at you.

Removable, durable Facial Cavity™ Seal locks onto lightweight ANSI certified frames that literally seal your eyes from anything the road or the weather throws at you.

Features squared ocular design that focuses on three main points of contact from the nose bridge to the temples for a light and comfortable fit over long periods of time. Add the neoprene rubber nose pads with the V-Wave™ rubber temple tips and you have sunglasses meant for just about anything.

Triloid nylon frames, 8-layer impact resistant lenses, polarized and mirrored surfaces--everything you need for maximum eye protection, no matter what comes your way. Sleek designs and a snug fit characterize the Wiley X Active Series. As does their ability to turn heads during quieter moments.

Smoke green lenses provide maximum glare reduction without distorting colors. Great for general daytime use. Light transmission: 19% (Polarized).

Fits medium and large faces. Includes the following:

Features squared ocular design that focuses on three main points of contact from the nose bridge to the temples for a light and comfortable fit over long periods of time. Add the neoprene rubber nose pads with the V-Wave™ rubber temple tips and you have sunglasses meant for just about anything.

Triloid nylon frames, 8-layer impact resistant lenses, polarized and mirrored surfaces--everything you need for maximum eye protection, no matter what comes your way. Sleek designs and a snug fit characterize the Wiley X Active Series. As does their ability to turn heads during quieter moments.

Fits medium and large faces. Includes the following:

Features squared ocular design that focuses on three main points of contact from the nose bridge to the temples for a light and comfortable fit over long periods of time. Add the neoprene rubber nose pads with the V-Wave™ rubber temple tips and you have sunglasses meant for just about anything.

Triloid nylon frames, 8-layer impact resistant lenses, polarized and mirrored surfaces--everything you need for maximum eye protection, no matter what comes your way. Sleek designs and a snug fit characterize the Wiley X Active Series. As does their ability to turn heads during quieter moments.

Bronze brown lenses provide superior visual definition. Increases contrast and enhances ground-level contours in most light conditions. Light transmission: 19%.

Fits medium and large faces. Includes the following:

Fits someone who is about 5'8" to 5'10" and 149 to 163 lbs.

Search terms:  Jumpsuit, jump suit, suits

The Radiator is custom built for anyone who wants extremely durable sunglasses and great wrap-around sun and wind protection. They fit tightly to the face to keep the sunglasses on during activity while looking Bad. Precision tune to your individual face. The Radiator is ideal for outdoor sports.

Already in use by Military Special Operations Units and Tactical Law Enforcement, the ultra tough, patented SG-1 V-Cut was designed to meet any situation. Slots allow for added circulation and ventilation for intense operations. Durable design meets ANSI safety and the military’s Vo Ballistic Test – MIL-PRF-31013, the rigorous 0.15 caliber ballistic impact test.

Fits medium and large faces. Includes the following:

Why sacrifice a great look for superior functionality when you can have both? Wiley X Goggles stay in place and easily adapt to your activity level. Customizable (lens package, temples for sunglass conversion) with durable Ultra-Foam™ sealing and Foil™ anti-fog technology to keep wearers comfortable and well protected.

This low profile goggle was inspired by the Army Rangers for multi-operational deployment. Durable Ultra Foam rubber-based rim seals your eyes from foreign objects and particles. Ballistic, anti-fog lenses can be changed depending on weather, environment, and operation. Meets both ANSI Z87.1-2003 and the military's ballistic requirement, MIL-PRF-31013.

Fits medium and large faces. Includes the following:

Why sacrifice a great look for superior functionality when you can have both? Wiley X Goggles stay in place and easily adapt to your activity level. Customizable (lens package, temples for sunglass conversion) with durable Ultra-Foam™ sealing and Foil™ anti-fog technology to keep wearers comfortable and well protected.

This low profile goggle was inspired by the Army Rangers for multi-operational deployment. Durable Ultra Foam rubber-based rim seals your eyes from foreign objects and particles. Ballistic, anti-fog lenses can be changed depending on weather, environment, and operation. Meets both ANSI Z87.1-2003 and the military's ballistic requirement, MIL-PRF-31013.

Fits medium and large faces. Includes the following:

Titanium sunglasses, made from the strongest metal on earth. These extremely durable frames fit your personality without compromising on design. Sophisticated and modern, they're light enough for whatever you're into.

At work or at play, these classy shades are a symbol of strength and good looks.

The Flex Temple System allows for comfortable fit on any size head! Has removable soft foam gasket. The temples can be replaced with the head strap (included). Glossy black frames. Shatterproof polycarbonate lenses with ANTI-FOG coating. Micro-fiber bag included.

The Altimaster II contains a durable mechanism made from temperature compensating metals for minimal friction and precision accuracy with an altitude range of 18,000 feet.

Note: This is the altimeter only and does not include any wrist mount, mounting pillow, or mounting hardware.

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

GOLDMEMBER is a precision machined aluminum camera quick release bracket that will easily mount to any surface you would normally attach a camera to.

With a simple pull of the locking piston ring, the center of the GOLDMEMBER slides out making it quick and easy...YET SECURE... to add and remove cameras (video and/or still cameras) whenever you want. Low profile pull-ring is small and not easily disengaged until you want it to!

Small, simple, and rock solid, the new GOLDMEMBER is a powerful addition to any camera flyer's arsenal of equipment.

Comes complete with hard gold anodized Base Plate, Camera Plate, Camera Allen Screw, no skid camera grip surface, and base plate flush-mounting hardware.

Goldmember Dimensions: click here

Includes:
D-Box, mounting hardware, and instructions.

Includes:
D-Box, mounting hardware, and instructions.

Includes:
D-Box, mounting hardware, and instructions.

Features red frames with Revo mirrored lenses made of a multi-layered titanium that provides a brilliant rainbow color. These are also scratch resistant. Comfortable adjustable elastic headstrap. Helmet compatible (most helmets).

LENS:

Features silver frames with Revo mirrored lenses made of a multi-layered titanium that provides a brilliant rainbow color. These are also scratch resistant. Comfortable adjustable elastic headstrap. Helmet compatible (most helmets).

LENS:

Features white frames with Revo mirrored lenses made of a multi-layered titanium that provides a brilliant rainbow color. These are also scratch resistant. Comfortable adjustable elastic headstrap. Helmet compatible (most helmets).

LENS:

Features yellow frames with Revo mirrored lenses made of a multi-layered titanium that provides a brilliant rainbow color. These are also scratch resistant. Comfortable adjustable elastic headstrap. Helmet compatible (most helmets).

LENS:

Designed for smaller faces (small or medium). Symmetrical venting allows cool air to enter frame naturally. Meets ANSI Z87.1-2003+ High Velocity Safety Standard. Technology features include removable, durable Facial Cavity™ Seal that locks onto lightweight ANSI certified frames that literally seal the eyes from outside elements. Excellent for sufferers of dry eye syndrome or anyone who has had LASIK or laser surgery. Add a timeless fashion sense and you have some superior shades.

Bronze lenses provide superior visual definition. Increases contrast and enhances ground-level contours in most light conditions. Light transmission: 19%.

Includes the following:

Designed for smaller faces (small or medium). Symmetrical venting allows cool air to enter frame naturally. Meets ANSI Z87.1-2003+ High Velocity Safety Standard. Technology features include removable, durable Facial Cavity™ Seal that locks onto lightweight ANSI certified frames that literally seal the eyes from outside elements. Excellent for sufferers of dry eye syndrome or anyone who has had LASIK or laser surgery. Add a timeless fashion sense and you have some superior shades.

Includes the following:

Designed for smaller faces (small or medium). Symmetrical venting allows cool air to enter frame naturally. Meets ANSI Z87.1-2003+ High Velocity Safety Standard. Technology features include removable, durable Facial Cavity™ Seal that locks onto lightweight ANSI certified frames that literally seal the eyes from outside elements. Excellent for sufferers of dry eye syndrome or anyone who has had LASIK or laser surgery. Add a timeless fashion sense and you have some superior shades.

Includes the following:

Designed for smaller faces (small or medium). Symmetrical venting allows cool air to enter frame naturally. Meets ANSI Z87.1-2003+ High Velocity Safety Standard. Technology features include removable, durable Facial Cavity™ Seal that locks onto lightweight ANSI certified frames that literally seal the eyes from outside elements. Excellent for sufferers of dry eye syndrome or anyone who has had LASIK or laser surgery. Add a timeless fashion sense and you have some superior shades.

Includes the following:

Technology features include removable, durable Facial Cavity™ Seal that locks onto lightweight ANSI certified frames that literally seal the eyes from outside elements. Excellent for sufferers of dry eye syndrome or anyone whos had LASIK or laser surgery. Add a timeless fashion sense and you have some superior shades.

Technology features include removable, durable Facial Cavity™ Seal that locks onto lightweight ANSI certified frames that literally seal the eyes from outside elements. Excellent for sufferers of dry eye syndrome or anyone whos had LASIK or laser surgery. Add a timeless fashion sense and you have some superior shades.

Technology features include removable, durable Facial Cavity™ Seal that locks onto lightweight ANSI certified frames that literally seal the eyes from outside elements. Excellent for sufferers of dry eye syndrome or anyone whos had LASIK or laser surgery. Add a timeless fashion sense and you have some superior shades.

Technology features include removable, durable Facial Cavity™ Seal that locks onto lightweight ANSI certified frames that literally seal the eyes from outside elements. Excellent for sufferers of dry eye syndrome or anyone whos had LASIK or laser surgery. Add a timeless fashion sense and you have some superior shades.

Includes a soft spacer that allows you to compensate for slightly different instrument sizes.

Note: The size of the Z-1 Evo IAS can be adjusted by simply changing the liner.

Size Chart

Includes a soft spacer that allows you to compensate for slightly different instrument sizes.

Note: The size of the Z-1 Evo IAS can be adjusted by simply changing the liner.

Size Chart

Includes a soft spacer that allows you to compensate for slightly different instrument sizes.

Note: The size of the Z-1 Evo IAS can be adjusted by simply changing the liner.

Size Chart

Includes a soft spacer that allows you to compensate for slightly different instrument sizes.

Note: The size of the Z-1 Evo IAS can be adjusted by simply changing the liner.

Size Chart

Includes a soft spacer that allows you to compensate for slightly different instrument sizes.

Note: The size of the Z-1 Evo IAS can be adjusted by simply changing the liner.

Size Chart

Includes a soft spacer that allows you to compensate for slightly different instrument sizes.

Note: The size of the Z-1 Evo IAS can be adjusted by simply changing the liner.

Size Chart

Soft-side dimensions are 21 5/8" x 15 3/4" x 7" deep.

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

Size Chart

Size Chart

Semi-flexible, smooth curves, quiet, and enough room to put at least 2 audibles on the inside of the helmet! The GUNER comes standard with Bonehead's Thermal-Fit liner, new buckle chin-strap closure, and great finish quality that you have come to expect from Bonehead.

Size Chart

Semi-flexible, smooth curves, quiet, and enough room to put at least 2 audibles on the inside of the helmet! The GUNER comes standard with Bonehead's Thermal-Fit liner, new buckle chin-strap closure, and great finish quality that you have come to expect from Bonehead.

Size Chart

Semi-flexible, smooth curves, quiet, and enough room to put at least 2 audibles on the inside of the helmet! The GUNER comes standard with Bonehead's Thermal-Fit liner, new buckle chin-strap closure, and great finish quality that you have come to expect from Bonehead.

Size Chart

Semi-flexible, smooth curves, quiet, and enough room to put at least 2 audibles on the inside of the helmet! The GUNER comes standard with Bonehead's Thermal-Fit liner, new buckle chin-strap closure, and great finish quality that you have come to expect from Bonehead.

Size Chart

Semi-flexible, smooth curves, quiet, and enough room to put at least 2 audibles on the inside of the helmet! The GUNER comes standard with Bonehead's Thermal-Fit liner, new buckle chin-strap closure, and great finish quality that you have come to expect from Bonehead.

Size Chart

Semi-flexible, smooth curves, quiet, and enough room to put at least 2 audibles on the inside of the helmet! The GUNER comes standard with Bonehead's Thermal-Fit liner, new buckle chin-strap closure, and great finish quality that you have come to expect from Bonehead.

Size Chart

Size Chart

Semi-flexible, smooth curves, quiet, and enough room to put at least 2 audibles on the inside of the helmet! The GUNER comes standard with Bonehead's Thermal-Fit liner, new buckle chin-strap closure, and great finish quality that you have come to expect from Bonehead.

Size Chart

Semi-flexible, smooth curves, quiet, and enough room to put at least 2 audibles on the inside of the helmet! The GUNER comes standard with Bonehead's Thermal-Fit liner, new buckle chin-strap closure, and great finish quality that you have come to expect from Bonehead.

Size Chart

Semi-flexible, smooth curves, quiet, and enough room to put at least 2 audibles on the inside of the helmet! The GUNER comes standard with Bonehead's Thermal-Fit liner, new buckle chin-strap closure, and great finish quality that you have come to expect from Bonehead.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

Biker Chix riding glasses by Pacific Coast were designed just for women. These great looking, great fitting wraparound styles are designed specifically to fit smaller faces with better protection from wind and sun.

All styles meet ANSI Z80.3 UV requirements. Be the first to own a pair of these stylish, yet functional, riding glasses.

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

The Z-1 Evo HP features a 3 mm polycarbonate shell that provides protection while still allowing the shell to be flexible and comfortable to wear. There are pouches on both sides of the Z-1 Evo HP to accommodate two audibles. The sturdy safety chinstrap is highly reliable and comfortable, keeping the helmet stable and in-place. The Z-1 Evo HP is flat on both sides, so you can easily install a camera mount.

Note: The size of the Z-1 Evo HP can be adjusted by simply changing the liner.

Size Chart

Recommended for use on Tandems.

Silibands are silicone elastic bands designed to stow parachute lines.  Made of silicone modified for this specific use, Silibands are available in different sizes to obtain the best result according to the type of suspension line in use.

DETAILS

• Made of silicone, highly consistent in extremely different environments, from very hot to very cold, and from very humid to very dry
• Don’t get sticky or dirty, and have a comfortable elasticity. Moreover, the material doesn’t have memory, and even when elongated for some time, it will return promptly to its original size
• Specifically shaped to stow suspension lines, with a round section, holding the stows in place even at lower tensions
• Manufactured in bright orange, for easier check of stows
• Each size is clearly marked to be easily recognized
• Operating temperature: -40 .. +460 °F (-40 .. 240 °C)
• Storage: 20 years

Notes:
1) It is suggested that you use two different sizes on the same bag, the larger size where the line stows are thicker (before the cascades), and the smaller size for the last stows.
2) We have listed the manufacturer's suggested sizes. Sizes to be used depend on the effective type of suspension line, the brand and size of the bag, and your packing skills and habits.

WARNING!  Use of incorrect size or line stows that are too long may create bag-lock malfunctions or out of sequence openings. Always refer to the container manufacturer's manual for packing instructions.

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

Made from Cordura. Size 20" L X 11" H X 6" W. Tools Not Included.

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

Bonehead used neoprene with a fastex buckle for around the neck and for under the chin closer. The unique way the lens lifts up eliminates buttons and ratchets. It utilizes an aluminum plate with a hole in it that moves onto a pin that comes out of the helmet (you need to see it to really get the picture). Double audible ready!

Size Chart

If you would like to order a Mamba in another color, please contact us.

NOTE: Regardless of the color of the Mamba, the lens frame will be matte carbon fiber.

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

Size Chart

Used Icarus EXTreme-FX 99 with 850 jumps (300 on new lines). DOM 10/98. MSW 218 lbs. Pack volume 267 cu. in.

Extras include D-bag, kill-line pilot chute with black hackey, and mini risers with Velcroless toggles.

The ICARUS EXTreme-FX is a Cross Brace Tri-cell canopy that delivers smooth openings and a strong flare. The EXTreme-FX will give you turf-surfing performance that is WAY AHEAD of anything you will get from a conventional canopy.

Note: The EXTreme-FX is not for everybody. It's built specifically for radical maneuverability and is ideal for turf surfing. It is for experienced elliptical pilots only.

Recommended wing loading: 1.8 - 2.4 PSF.

Let’s face it. Electronic devices and water don’t play well together. L&B wants your Optima, Solo, and/or Viso to last a lifetime, so they came up with the Protektor.

The Protektor helps to keep your Optima, Solo, or Viso dry and functional even if you don’t make it to the other side of the pond.

Specifically designed for the Optima, Solo, and Viso, the Protektor keeps your device nice and dry. The two-piece clamshell design keeps water out of your Optima, Solo, or Viso and still allows full functionality of the unit and visibility of the screen interface.

Altimeter Sold Separately.

Please note that in order to use this converter (or any other USB to Serial converter) you need to use Jump-Track version 2.00.D or version 3.00.

Altimeter not included.

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

Customers all over the world wanted a helmet that was simple and sleek, and had the quality and design that has made Bonehead Composites famous in the skydiving world.. and Bonehead delivered! The All-Sport features a very simple shell design that is flatter on the left and the right so that camera mounts can be added easier. Bonehead took all the best attributes of the Guner and Mindwarp Pimp Daddy and combined them to make the All-Sport. Internal audible pockets have been integrated into the helmet so that there is no need to build out the sides of the shell to accommodate audibles and still keep the interior comfortable.

The All-Sport comes standard with Bonehead's ingenious Thermal-Fit liner and neoprene padded leather FASTEX chin-strap closure.

Size Chart

Size Chart

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

]]> BadDog Services and Merchandise LLC http://www.baddogservices.com/shop/index.php?main_page=product_info&products_id=182 Mon, 06 May 2013 22:13:24 -0400 73.10 USD 182 Parasport Italia 2 http://www.baddogservices.com/shop/images/blue%20fairwind%20std%20liner.JPG http://www.baddogservices.com/shop/index.php?main_page=product_info&products_id=162 http://www.baddogservices.com/shop/index.php?main_page=product_reviews&products_id=162 The Z-1 HP is a quality skydiving helmet that combines all of the features wanted by modern skydivers, both professionals and amateurs.

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

]]> BadDog Services and Merchandise LLC http://www.baddogservices.com/shop/index.php?main_page=product_info&products_id=185 Mon, 06 May 2013 22:13:59 -0400 73.10 USD 185 Parasport Italia 2 http://www.baddogservices.com/shop/images/white%20fairwind%20std%20liner.JPG http://www.baddogservices.com/shop/index.php?main_page=product_info&products_id=163 http://www.baddogservices.com/shop/index.php?main_page=product_reviews&products_id=163 The Z-1 HP is a quality skydiving helmet that combines all of the features wanted by modern skydivers, both professionals and amateurs.

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

Customers all over the world wanted a helmet that was simple and sleek, and had the quality and design that has made Bonehead Composites famous in the skydiving world.. and Bonehead delivered! The All-Sport features a very simple shell design that is flatter on the left and the right so that camera mounts can be added easier. Bonehead took all the best attributes of the Guner and Mindwarp Pimp Daddy and combined them to make the All-Sport. Internal audible pockets have been integrated into the helmet so that there is no need to build out the sides of the shell to accommodate audibles and still keep the interior comfortable.

The All-Sport comes standard with Bonehead's ingenious Thermal-Fit liner and neoprene padded leather FASTEX chin-strap closure.

Size Chart

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

Size Chart

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

Size Chart

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

Bonehead used neoprene with a fastex buckle for around the neck and for under the chin closer. The unique way the lens lifts up eliminates buttons and ratchets. It utilizes an aluminum plate with a hole in it that moves onto a pin that comes out of the helmet (you need to see it to really get the picture). Double audible ready!

Size Chart

NOTE: Regardless of the color of the Mamba, the lens frame will be matte carbon fiber.

Size Chart

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

Customers all over the world wanted a helmet that was simple and sleek, and had the quality and design that has made Bonehead Composites famous in the skydiving world.. and Bonehead delivered! The All-Sport features a very simple shell design that is flatter on the left and the right so that camera mounts can be added easier. Bonehead took all the best attributes of the Guner and Mindwarp Pimp Daddy and combined them to make the All-Sport. Internal audible pockets have been integrated into the helmet so that there is no need to build out the sides of the shell to accommodate audibles and still keep the interior comfortable.

The All-Sport comes standard with Bonehead's ingenious Thermal-Fit liner and neoprene padded leather FASTEX chin-strap closure.

Size Chart

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

Customers all over the world wanted a helmet that was simple and sleek, and had the quality and design that has made Bonehead Composites famous in the skydiving world.. and Bonehead delivered! The All-Sport features a very simple shell design that is flatter on the left and the right so that camera mounts can be added easier. Bonehead took all the best attributes of the Guner and Mindwarp Pimp Daddy and combined them to make the All-Sport. Internal audible pockets have been integrated into the helmet so that there is no need to build out the sides of the shell to accommodate audibles and still keep the interior comfortable.

The All-Sport comes standard with Bonehead's ingenious Thermal-Fit liner and neoprene padded leather FASTEX chin-strap closure.

Size Chart

Size Chart

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

]]> BadDog Services and Merchandise LLC http://www.baddogservices.com/shop/index.php?main_page=product_info&products_id=344 Mon, 06 May 2013 22:25:15 -0400 73.10 USD 344 Parasport Italia 2 http://www.baddogservices.com/shop/images/blue%20fairwind%20std%20liner.JPG http://www.baddogservices.com/shop/index.php?main_page=product_info&products_id=346 http://www.baddogservices.com/shop/index.php?main_page=product_reviews&products_id=346 The light weight and strength are the principal features of this helmet. It uses a strong chin strap with a sturdy and reliable buckle.

The main difference between the Military Fairwind and the Standard Fairwind is the available colors. The Standard Fairwind comes in gloss colors while the Military Fairwind comes in flat (matte) colors. In addition, the Military Fairwind has a clasp that is just like the clasp on the Evo.

Both the Standard Model and the Military Model are available with either a standard foam liner or a comfort liner, which is just like a Z-1 or Evo liner (cloth covering, washable, audible pockets).

Size Chart

The Z-1 HP is a comfortable lightweight helmet with unsurpassed aerodynamics. This is a leading full-face skydiving helmet with excellent strength due to the use of HIGH IMPACT ABS material like that used to build motorcycle helmets.

Features include an adjustable, airtight collar made of soft, anallergic polyester and a removable, variable density liner, giving this helmet a comfortable fit and stability.

Note: The size of the Z-1 HP can be adjusted by simply changing the liner.

Size Chart

Tips and Tricks

Tossed blue skulls and cross bones on black doo rag.

Size Guide:  Large 22 3/8"

Measuring Your Head:
To determine the circumference of your head, wrap a string or soft measuring tape around your head, just above your ears and just above your eyebrows.

Putting Your Helmet On:
To put your helmet on your head, align the front rim with the top of your eyebrows. Hold the straps on both sides and roll the helmet over the back of your head. Check for gaps. Pads should be flush against your cheeks and forehead. The back of the helmet should not touch the nape of your neck. With the chin strap fastened, your helmet should be snug and comfortable. Try to roll your helmet off your head. If the skin on your forehead moves, you have a good fit. Be sure your helmet is above your eyebrows and that your goggles fit your face while wearing the helmet.

Size Guide:  Small 20 7/8"

Measuring Your Head:
To determine the circumference of your head, wrap a string or soft measuring tape around your head, just above your ears and just above your eyebrows.

Putting Your Helmet On:
To put your helmet on your head, align the front rim with the top of your eyebrows. Hold the straps on both sides and roll the helmet over the back of your head. Check for gaps. Pads should be flush against your cheeks and forehead. The back of the helmet should not touch the nape of your neck. With the chin strap fastened, your helmet should be snug and comfortable. Try to roll your helmet off your head. If the skin on your forehead moves, you have a good fit. Be sure your helmet is above your eyebrows and that your goggles fit your face while wearing the helmet.

Size Guide:  XL 23 1/2"

Measuring Your Head:
To determine the circumference of your head, wrap a string or soft measuring tape around your head, just above your ears and just above your eyebrows.

Putting Your Helmet On:
To put your helmet on your head, align the front rim with the top of your eyebrows. Hold the straps on both sides and roll the helmet over the back of your head. Check for gaps. Pads should be flush against your cheeks and forehead. The back of the helmet should not touch the nape of your neck. With the chin strap fastened, your helmet should be snug and comfortable. Try to roll your helmet off your head. If the skin on your forehead moves, you have a good fit. Be sure your helmet is above your eyebrows and that your goggles fit your face while wearing the helmet.

Polarized lens sunglasses offer better function and versatility than conventional sunglasses. Polarized lenses dramatically reduce reflective glare off of water, highways, and other reflective surfaces. Eye fatique associated with prolonged exposure to the sun's glare is effectively diminished.

Comfort and function are key with these special padded glasses. Styled as a sunglass, padded glasses offer protection from wind and dust much like a goggle. Soft and durable foam lines the inner portion of the sunglass frame. As an added feature, these padded frames float, making them excellent for use on watercraft.

Polarized lens sunglasses offer better function and versatility than conventional sunglasses. Polarized lenses dramatically reduce reflective glare off of water, highways, and other reflective surfaces. Eye fatique associated with prolonged exposure to the sun's glare is effectively diminished.

Comfort and function are key with these special padded glasses. Styled as a sunglass, padded glasses offer protection from wind and dust much like a goggle. Soft and durable foam lines the inner portion of the sunglass frame. As an added feature, these padded frames float, making them excellent for use on watercraft.

Frame:TPX (Polymethylpentene). Frame density 0.83 g.

Lens:1.1 mm acetate polarized.

Harley riders worldwide know Pacific Coast for The Original KD's sunglasses but many bikers don't realize how effective the Airfoil Shifter 8700 sunglasses are at deflecting the wind.

Camera flyers and competitors alike will find the Optima LED a very versatile tool to help them keep track of their altitude, even during the most intense skydives. Add an Optima LED to your altitude awareness arsenal and have the extra edge you need in the sky.

Note: The Optima LED works with the original Optima, which has a port for the Optima LED. The Optima LED does not work with the standard Optima II, which has no port.

Note: These gloves feature black Spandex backs with white leather palms.

Size Chart

Note: These gloves feature black Spandex backs with white leather palms.

Size Chart

Note: These gloves feature black Spandex backs with white leather palms.

Size Chart

Note: These gloves feature black Spandex backs with white leather palms.

Size Chart

Note: These gloves feature black Spandex backs with white leather palms.

Size Chart

Note: These gloves feature white Spandex backs with white leather palms.

Size Chart

Note: These gloves feature white Spandex backs with white leather palms.

Size Chart

Note: These gloves feature white Spandex backs with white leather palms.

Size Chart

Note: These gloves feature white Spandex backs with black leather palms.

Size Chart

Note: These gloves feature white Spandex backs with black leather palms.

Size Chart

Note: These gloves feature white Spandex backs with black leather palms.

Size Chart

Note: These gloves feature white Spandex backs with black leather palms.

Size Chart

Note: These gloves feature black Spandex backs with black leather palms.

Size Chart

Size Chart

Size Chart

Available in four sizes: S, M, L, and XL (these are based on typical men's sizes -- for a typical women's size, go one size smaller).

Available only in black.

Available in four sizes: S, M, L, and XL (these are based on typical men's sizes -- for a typical women's size, go one size smaller).

Available only in black.

Available in four sizes: S, M, L, and XL (these are based on typical men's sizes -- for a typical women's size, go one size smaller).

Available only in black.